HONDA CBR 900 1992-'95
Shopping for fairings for your big bad Honda CBR 900 RR? As luck would have it, Airtech's got everything you might possibly need for your machine -- and then some. We've got the largest variety of stock and custom bodywork in the business. In our upper department we carry a direct replacement for the stock item and a competition version with the headlight holes filled in. Would you believe we even have an endurance style racing version with the right headlight filled in to create space for a number plate and the left hole open? We do. In fact the center pieces on either side come already attached to this endurance upper for super swift removal.
We also sell the mid fairings separately for both sides of the bike and then a one piece lower section. Another option we have available for the lower is an assembly that has a filled in belly pan and is extended back to the rear tire for a sweet GP look.
For the seat area we offer a one piece race seat. In front we offer the stock replacement front fender, and a faired front fender that extends down the forks to the front axle. Of course, we also make a rear swing arm fender.
For a truly unique look, check out our NSR 900 or Erion FX Replica bodywork. Any way you want to do it, Airtech can set you up properly. Call us today to order up a whole new wardrobe for your bike.
(Image 1) AT93
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
AT93 - AIR-TECH CBR900 SUPERBIKE TAIL
Honda CBR 900 RR Superbike tail section
This is a special race tail with a filled in seat pan.The front edge of the seat is designed to butt up against the chassis, with the molded in lips tucked on the inside of the frame rails. A lot of professional racers like this super bike style seat because they can feel the rear suspension and rear tire better, they also feel that the stock upholstery dampens the effect and that they can get better handling out of there chassis with this style of tail section. This seat works with closed cell race foam, available through us.
(Image 1) AT94
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
AT94 - AIR TECH CBR900 FRONT FENDER
Honda CBR 900 RR front fender
If you want a different look for your CBR 900 RR we can help you out. We offer a front fender that has skirts that come down the fork legs to look like an upside down fender. Upgrade your bike for that GP look. Call today.
(Image 1) AT95
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
AT95 - AIR TECH CBR900 REAR FENDER
Honda CBR 900 RR rear fender / hugger
If you want a different look for your CBR 900 RR we can help you out. We made this rear swing arm fender that mounts on the top of the brace to keep dirt and crud from being thrown on to the shock and linkage. Upgrade your bike for that GP look. Call today.
(Image 1) AT96
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
AT96 - AIR TECH CBR900 GAS TANK
Honda CBR 900 RR fuel tank
Check out our lightweight racing gas tank! A remarkable weight saving for the top of your bike! This will make your bike easier to flick from side to side and is a primo way to improve the handling on your Honda CBR 900 RR.
(Image 1) AT96ET
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
AT96ET - AIR TECH CBR900 ENDURANCE TANK
Honda CBR 900 RR endurance fuel tank
This is the endurance version of our lightweight racing gas tank. It has a deep sump at the back of the stock tank that raises the fuel capacity to about 24 litres.
(Image 1) AT97K
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
AT97K - AIR TECH CBR900 AIR BOX KIT
Honda CBR 900 RR Ram air box kit
This pressurized air box was originally designed in 93' and used by Dave Sadowski to win the coveted Formula USA Championship. It has undergone extensive testing and one complete design change. In other words, the thing has been sorted out. This air box requires the radiator be lowered one inch to fit the snorkel into position. Air is drawn from behind the steering head above the radiator into the upper portion of the box. Three plates in the upper keep the cool, dense air separate from the engine and radiatior heat. This patented design is guaranteed to give your CBR900 5-7% increase in horsepower on the top end. This Airtech design comes complete with all the mounting hardware brackets and washable UNI filter. Get more top end punch, get this airbox today. Dollar for dollar, this may well be the largest horsepower gain you can get for your greenbacks.
(Image 1) CBR91
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
CBR91 - 92/94 CBR900 STREET UPPER
Honda CBR 900 RR Upper fairing - street
Replacement upper with dual headlight cut outs.
(Image 1) CBR910
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
CBR910 - 92/94 CBR900 ENDURANCE UPPER
Honda CBR 900 RR endurance upper fairing - w/ mids attached
This is the endurance style upper fairing for your Honda CBR 900 RR with one headlight opening off to the left side. It has the mid fairings attached and will bolt up to stock style lower fairing CBR94 or the modified lower with oil containment CBR911.
(Image 1) CBR911 - 92/95 CBR900 1 PIECE LOWER LONG
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
CBR911 - 92/95 CBR900 1 PIECE LOWER LONG
Honda CBR 900 RR lower fairing - belly pan w/ oil containment
This is a cool part for your Honda CBR 900 RR. We took the stock lower, filled it in and stretched it for that awesome GP look. Legal for most racing organizations.
(Image 1) CBR91C
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
CBR91C - 92/94 CBR900 COMPETITION UPPER
Honda CBR 900 RR Upper fairing - competition
This upper has the same exterior dimensions as the stock upper, but the headlight is filled in for competition use or custom street applications. This is an excellent upper for track days, because it will bolt on to stock lowers so you can save your expensive headlight assembly and upper fairing.
(Image 1) CBR92
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
CBR92 - 92/95 CBR900 RIGHT CENTER SIDE
Honda CBR 900 RR Side center fairing - right mid
Replacement center side fairing / mid.
(Image 1) CBR93
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
CBR93 - 92/95 CBR900 LEFT CENTER SIDE
Honda CBR 900 RR Side center fairing - left mid
Replacement center side fairing / mid.
(Image 1) CBR94
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
CBR94 - 92/95 CBR900 1PIECE LOWER (SHORT)
Honda CBR 900 RR lower fairing - belly pan
Replacement lower fairing / belly pan. Will work with stock upper and mids or the endurance style upper with attached mids..
(Image 1) CBR95
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
CBR95 - 92/95 CBR900 SUPERSPORT TAIL
Honda CBR 900 RR Supersport tail section
We've taken the right and left seat sides, the tail light area, and the solo seat cowl and molded them into a one-piece race tail. Uses the stock front upholstery, no passenger seat. Taillight opening has been filled in, you can cut this open for use on a street baike. Give your street bike a custom race look with this supersport race tail. Get yours today!
(Image 1) CBR96
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
CBR96 - 92/95 CBR900 FRONT FENDER
Honda CBR 900 RR front fender
Stock replacement front fender.