Classic boxer
So you own an old airhead, huh? Cool bike! If your looking for some wind protection in the shape of a quarter fairing, you’ve come to the right place!
We also make a beautiful cafe seat. This is the original seat, sculpted by our head designer Kent Riches, that some weasel knocked off and is now selling on Ebay from his garage in Bumfuck, CO. No it is not a "Knoscher" or "Rennsport" seat nor are they the original designer. It was actually based on a Ducati 900 SS seat and we spent many hours modifying it and molding it into this cool tail before they knocked it off. Thank you.
We also have full sized and bobbed front and rear fenders, dash panels to hold your clocks, a 10 gallon fuel tank, a cafe style half fairing and even a competition upper if you’re crazy enough to race one of these bad boys…
Airhead owners get all the chicks…
A great example of what is possible with our parts. Jim Conachen used our Ducati 900SS half fairing, BMW cafe seat and bobbed front fender to build this clean special.
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
BMWBT - BMW BOXER 10 GAL. TANK
BMW Fuel tank -10 gallon
Large Heinrich style touring tank for all you Iron Butts.
** Currently not available. Pricing to be determined. **
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
VSB2 - VINTAGE SADDLE BAGS BMW W/O RONDEL
BMW saddle bags without roundel mount
These saddle bags are identical to the VSB1 but without the roundel mounts. Set includes both bags with lids. No hardware included.
Turn signal mounting surfac: approx 2.5"
Originally BMW bags but will fit many applications.
(Image 1) VSB1
(Image 2) VSB1
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
VSB1 - VINTAGE SADDLE BAG BMW W/ RONDEL
BMW saddle bags with rondel mount
These saddle bags have rondel mounts and turn signal mounts. We make the same bag without the mounting spot for the rondel – VSB2 below. Set includes both bags with lids. No hardware included.
Originally BMW bags but will fit many applications.
(Image 1) BMWR3M
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
BMWR3M - 74-84 BMW R FRONT FENDER - BOBBED
BMW Front fender – short
Same style lines and mounting points, but shortened 3" on both ends so 6" shorter overall.
Fits all 74-84 BMW boxers except the following models: R65, R80GS and R80ST.
(Image 1) BMWR3
(Image 2) BMWR3
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
BMWR3 - 74-84 BMW BOXER FRONT FENDER
BMW Front fender – stock length
Fits all 74-84 BMW boxers except the following models: R65, R80GS and R80ST.
(Image 1) BMWR2 - BMW BOXER "R" REAR FENDER
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
BMWR2 - BMW BOXER "R" REAR FENDER
BMW Rear fender
R-series rear fender
(Image 1) BMWR1M - 70-73 BMW /5 FRONT FENDER -BOBBED
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
BMWR1M - 70-73 BMW /5 FRONT FENDER -BOBBED
BMW front fender – short
Short /5 style front fender. Fits ’70-’73 R50/5, R60/5 and R75/5.
(Image 1) BMWR1 - 70-73 BMW BOXER /5 FRONT FENDER
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
BMWR1 - 70-73 BMW BOXER /5 FRONT FENDER
BMW Front fender – stock length
Long /5 style front fender. Fits ’70-’73 R50/5, R60/5 and R75/5.
(Image 1) BMWRSS3
(Image 2) BMWRSS3 - RENNSPORT CAFE SEAT - SHORT
(Image 3) BMWRSS3 - RENNSPORT CAFE SEAT - SHORT
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
BMWRSS3 - RENNSPORT CAFE SEAT - SHORT
BMW Cafe Rennsport seat
This Rennsport seat was inspired by the RS54. It’s designed to work with a shortened subframe that is cut behind the shock mounts. The cool thing is the subframe just bolts onto R models so you could pick up a spare sub section and modify it.
We’ve removed the skirt notching (as seen on the seats above) that clears the frame tabbing for a cleaner look. You can trim this seat to suit.
(Image 1) BMWRSSUPL - BMW SEAT PAN LONG (SHORT TANK)
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
BMWRSSUPL - BMW SEAT PAN LONG (SHORT TANK)
BMW Cafe Rennsport seatpan – long
This upholstery pan fits our Rennsport cafe seats. It kicks up in the front area to hide the unsightly gap in the back of the tank where the tank mounting bolts live. This is the long seatpan, to work with the short style fuel tanks Tanks that are definitely short, to our knowledge:
– toaster tanks
– tanks with rubber knee pads
Length: 18"
Please note: does not fit BMWRSS3 – RS54 style seat
(Image 1) BMWRSSUPS - BMW SEAT PAN SHORT (LONG TANK)
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
BMWRSSUPS - BMW SEAT PAN SHORT (LONG TANK)
BMW Cafe Rennsport seatpan – short
This upholstery pan fits our Rennsport cafe seats. It kicks up in the front area to hide the unsightly gap in the back of the tank where the tank mounting bolts live. This is the short seatpan, to work with the longer R90S style fuel tanks.
Length: 16.25"
Please note: does not fit BMWRSS3 – RS54 style seat
(Image 1) BMWRSS2 - BOXER "R" CAFE TAIL N/R
(Image 2) BMWRSS2 - BOXER "R" CAFE TAIL N/R
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
BMWRSS2 - BOXER "R" CAFE TAIL N/R
BMW cafe seat
The boss restored a really nice T500 and decided to give it a mild cafe treatment with this BMW seat. He glassed a metal bracket into the bottom of the seat so it unbolts with 2 screws and you can put the stock seat back on it in a few minutes. We make many other parts like quarter fairings, different seats and tanks that will fit the T500, call us today to discuss your project!
(Image 1) BMWRSS1 - BOXER "R" CAFE TAIL W/R
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
BMWRSS1 - BOXER "R" CAFE TAIL W/R
BMW Cafe seat with roundel mount
Classic Rennsport style seat with a recessed spot on the tail for a BMW roundel. The seat comes with an aluminum bracket, that you will have to mount inside the back of the tail with some 5-minute epoxy (available from any hardware store) so it attaches to the accessory mount in the back. We used to glass these mounts into the back of the tail but have noticed the mount on the bike can be off by as much as 1/4", so it’s better if you do it yourself, so you can mount the seat perfectly straight.
We also offer two different styles of seat pans, for use with both short and long tanks, see below.
(Image 1) DUC91C - 77/80 900SS RACE FAIRING
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
DUC91C - 77/80 900SS RACE FAIRING
Ducati 750 Sport Half fairing – competition
Lastly, we have a competition version for you racers out there who don’t need no stinkin’ headlight at all.
This is also a cool fairing for those who want to install some unobtrusive projector beam headlights for that replica racer look while keeping the bike streetable.
(Image 1) DUC917 - 77/80 900SS FAIRING 7"H/LIGHT LIP
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
DUC917 - 77/80 900SS FAIRING 7"H/LIGHT LIP
Ducati 750 Sport Half fairing – 7″ opening
This half fairing has a smaller, 7″ headlight opening with a return angling rearwards, to fit a standard 7″ automotive bulb.