CBR 600 F4 ’99-’00
The fourth generation CBR600 is quite an impressive piece unless you have rashed or crashed bodywork. If it does, we can help. As you can see from these pictures we offer quite a large selection of bodywork for the F4. Not only do we have a street upper fairing, as well as a competition upper, right and left lowers. And for you racers we offer a two-piece fairing design with a one piece upper and one piece lower that incorporates oil containment for various racing organizations. You have a choice of either a super sport or super bike tail section as well as a front fender. If your looking at replacing crash damaged bodywork or want to prep your bike for the race track and give us a call because we got what you need.
(Image 1) GLF4B
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
GLF4B - 99/00 CBR600F4 2PCE FNG S/S TAIL
Honda CBR 600 F4
This is a complete body kit for an F4 utilizing our two-piece race fairing assemblies. This kit comes with a super sport upper and super sport lower with oil containment. This kit also includes our super sport race tail to use your stock upholstery as well as a front fender. This kit is approved by most racing organizations and used widely across the Unites States in road racing competitions.
(Image 1) GLF4A
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
GLF4A - 99/00 CBR600F4 3PCE FNG S/S TAIL
Honda CBR 600 F4
If you are replacing crash damaged bodywork or need track bodywork this is the kit for you. If your track organization does not require oil containment this three-piece fairing assembly is the easiest to mount onto your chassis. This includes our competition upper fairing with right and left lowers and our super sport race tail and front fender. Street guys can cut out the headlight and save a grip of money over OEM plastics! Very popular trackday setup.
(Image 1) 5CBR69SB
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
5CBR69SB - 99/00 CBR600 F4 SUPERBIKE BRACKET
Honda CBR 600 F4
Seat Bracket: this is the bracket used to support the riders weight if you are using our 5CBR69B Super Bike Race Tail.
(Image 1) 5CBR69B
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
5CBR69B - 99/00 CBR600 F4 SUPERBIKE TAIL
Honda CBR 600 F4 Super Bike Race Tail
This tail section is similar to our Super Sport Race Tail with the exception of that the seat pan area, where the rider sits, is filled in. This seat requires the use of our 5CBR69SB Seat Bracket and lightweight, thin race foam that is also available at Air-Tech. Most racers prefer this style of seat that uses a thinner race pad so that they can feel the rear tire and rear suspension more on the bike. This tail meets most race organization number plate requirements.
Use with 5CBR69SB.
(Image 1) 5CBR69S
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
5CBR69S - 99/00 CBR600 F4 SUPERSPORT TAIL
Honda CBR 600 F4 Super Sport Race Tail
This is our most popular one-piece race tail for the CBR 600 F4. This is the right and left seat side and the solo seat cowl molded as a one-piece unit. Simply slide your long upholstery into the seat assembly so that the fiberglass tail hides the passenger part of the seat and stick the assembly onto your chassis for a one-piece race look. The tail light holes are filled in for racing but can be easily cut open for street use. This race tail meets all of the number plate requirements for most racing organizations.
(Image 1) 5CBR69
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
5CBR69 - 99/00 CBR600 F4 U/SEAT ENCLOSURE
Honda CBR 600 F4 Undertail – under seat enclosure
This is a real cool fiberglass piece that mounts underneath our tail sections and encloses the bottom for a clean custom look. This piece has a license plate mount already molded into it for a clean design instead of that ugly black plastic stock panel on your bike.
This requires some cutting and trimming of the black plastic panels and pretty much anything that sticks below the stock painted body panels. Takes a moderate skill level and some hand tools to install. If you have the desire to have a cool under tail on your bike this is the piece you need.
(Image 1) 5CBR66
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
5CBR66 - 99/00 CBR600 F4 FRONT FENDER
Honda CBR 600 F4 Front Fender
This is a direct replacement for the CBR600 F4 front fender.
(Image 1) 5CBR63
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
5CBR63 - 99/00 CBR600 F4 LEFT LOWER
Honda CBR 600 F4 Left Lower fairing
Replacement right lower fairing.
(Image 1) 5CBR62 - 99/00 CBR600 F4 RIGHT LOWER
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
5CBR62 - 99/00 CBR600 F4 RIGHT LOWER
Honda CBR 600 F4 Right lower fairing
Replacement right lower fairing.
(Image 1) 5CBR61S
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
5CBR61S - 99/00 CBR600 F4 STREET UPPER
Honda CBR 600 F4 Street upper fairing
Our fiberglass upper is identical in exterior shape and design to your original Honda piece, the only exception is that we do not do the internal tab work for the headlights and air ducts, but that’s no big deal. They’re not really needed. A crafty guy can get this mounted onto his bike in a matter of minutes and save you hundreds of dollars over the stock Honda piece. If you have questions on how to mount this onto your chassis please call our sales reps, we will be happy to explain it to you. You’ll save you a bunch of money over the stock Honda piece. Get yours today!
(Image 1) 5CBR61C
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
5CBR61C - 99/00 CBR600 F4 COMPETITION UPPER
Honda CBR 600 F4 Competition upper fairing
Have a race bike? Or just want to take your bike out to some track days? If so, this is the piece for you! Take off that expensive stock Honda upper fairing and expensive headlight and put on our competition version. It is identical in exterior shape to your stock Honda piece with the exception to your headlight holes are filled and the turn signal bumps have been smoothed out. Don’t risk damaging your expensive Honda pieces at a track day, or maybe you just want to do a custom street application and want to cut your own headlight holes out of the front. This is what you need!
(Image 1) 5CBR62HRC
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
5CBR62HRC - 99/00 CBR600 F4 HRC RACE LOWER
Honda CBR 600 F4 Super Sport lower fairing
This is the lower section to our two-piece super sport race fairing assembly. This is the bottom half of the right and left lower, the front radiator shrouds, and oil containment all molded as a one-piece unit. This lower meets all AMA and FIM oil containment rules. This fairing only works with our 5CBR61HRC upper fairing. If your racing and F4, you need this part!
Only works with the 5CBR61HRC upper fairing.
(Image 1) 5CBR61HRC
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
5CBR61HRC - 99/00 CBR600 F4 HRC RACE UPPER
Honda CBR 600 F4 Super Sport Upper fairing
This is the upper fairing to our two-piece race fairing assembly. It combines the stock upper fairing, half of the right and left lowers, and the radiator shrouding into a one-piece unit. This fairing assembly splits half way down the side of the bike and only works with our 5CBR62HRC lower fairing. If you’re racing a CBR 600 F4 this two-piece race fairing is what you need!
Only works with the 5CBR62HRC lower fairing.