750SS '97-'98
Airtech has what is probably the largest selection of bodywork for Ducati twins in the whole world.
Different? "Nah! It looks the same as the ’91-’97 model" you say. Nope, there is definitely a difference but only in a couple of pieces. Because the front fairing assembly, the rear seat sides, seat and front fender are all the same. Ducati pulled a sly one and just changed the fairing lowers. Yep, the right and left lowers have an additional vent added to them on the side. See it?? Yep that is the only difference. We make them so if you need them pick up the phone and give us a call. Call us today!
This is the Airtech cafe conversion for your 750SS, these parts were designed for the 91-98 750SS. We have a fairing bracket kit under development.
Supermono conversion kit for Ducati 750SS.
Is your ol’ SS a bit rough or is it starting to look a bit dated? Check t
(Image 1) 2DUC91
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
2DUC91 - 91/96 DUC900/750SS STREET UPPER CE
Ducati 750SS Street upper fairing
Replacement upper with headlight cutout for your Ducati 750SS.
(Image 1) 2DUC910
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
2DUC910 - 91/96 DUC900/750SS SIGNAL COVERS
Turn signal covers
Save your expensive turn signals if you take your bike to the track! No need to crash your turnsignals when these babies are available.
(Image 1) 2DUC91C
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
2DUC91C - 91/96 DUC900/750SS COMP UPPER
Ducati 750 SS Competition upper fairing
Want to race your Ducati 750SS, or maybe just take it out to a track day? This is the fairing you need! Use for race purposes or cut your own holes for a custom street application with trick headlights.
(Image 1) 2DUC92C
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
2DUC92C - 91/96 DUC900/750SS RH LOWER COMP
Ducati 750SS Competition right lower fairing – long (SP)
Replacement lower fairing for your Ducati 750SS without turn signal cut out. Uses stock mounting points and will work with stock upper fairing or our replacement upper fairing.
(Image 1) 2DUC92S
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
2DUC92S - 91/96 DUC900/750SS RH LOWER SHORT
Ducati 750SS Right lower fairing – short (CR)
Replacement lower fairing for your Ducati 750SS with turn signal cut out. Uses stock mounting points and will work with stock upper fairing or our replacement upper fairing.
(Image 1) 2DUC93C
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
2DUC93C - 91/96 DUC900/750SS LH LOWER COMP
Ducati 750 SS Competition left lower fairing – long (SP)
Replacement lower fairing for your Ducati 750SS without turn signal cut out. Uses stock mounting points and will work with stock upper fairing or our replacement upper fairing.
(Image 1) 2DUC93S
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
2DUC93S - 91/96 DUC900/750SS LH LOWER SHORT
Ducati 750SS Left lower fairing – short (CR)
Replacement lower fairing for your Ducati 750SS with turn signal cut out. Uses stock mounting points and will work with stock upper fairing or our replacement upper fairing.
(Image 1) 2DUC94
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
2DUC94 - 91/96 DUC900/750SS RIGHT SEAT SIDE
Ducati 750SS Right seat side
Replacement seat side for your Ducati 750SS. Uses stock mounting points. Please note that our parts do not have the inside tabs in the rear but installation is still easy. Call our reps with any questions.
(Image 1) 2DUC95
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
2DUC95 - 91/96 DUC900/750SS LEFT SEAT SIDE
Ducati 750SS Left seat side
Replacement seat side for your Ducati 750SS. Uses stock mounting points. Please note that our parts do not have the inside tabs in the rear but installation is still easy. Call our reps with any questions.
(Image 1) 2DUC97
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
2DUC97 - 91/96 DUC900/750SS FRONT FENDER
Ducati 750SS Front fender
Replacement fender for your Ducati 750SS. Lighter than stock for quicker steering response. Order it in carbon fiber for a trick look!
(Image 1) 2DUC98
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
2DUC98 - 91/96 DUC900/750SS RACE TAIL
Ducati 900SS Superbike seat – Superlight
"Superlight" style race seat for your Ducati 900SS. Taillight hole is cut open.Don’t forget to order your upholstery as well, shown below!
(Image 1) 2DUC99
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
2DUC99 - 91/96 DUC900/750SS REAR FENDER
Rear fender – hugger
Replacement fender for your Ducati 750SS. Order it in carbon fiber for a trick look!
(Image 1) 3DUC92
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
3DUC92 - 97/98 DUC900SS RIGHT LOWER
Ducati 750SS Right lower fairing – long (SP)
Replacement lower fairing for your Ducati 750SS with turn signal cut out. Uses stock mounting points and will work with stock upper fairing or our replacement upper fairing.
(Image 1) 3DUC93
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
3DUC93 - 97/98 DUC900SS LEFT LOWER
Ducati 750SS Left lower fairing – long (SP)
Replacement lower fairing for your Ducati 750SS with turn signal cut out. Uses stock mounting points and will work with stock upper fairing or our replacement upper fairing.
(Image 1) 3DUC94
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
3DUC94 - 93/01 M900 MONSTER FRONT FENDER
Ducati M900 Monster front fender
Lightweight front fender. Available in carbon fiber as well, ask your sales rep for price!