Bodywork collection

7GSXR7SS2 - 00/03 GSXR750 S/SPORT LOWER W/OIL

Suzuki GSXR 600 Super sport race lower fairing This is the bottom half to our two-piece super sport race fairing assembly. This piece is the bottom right and left lowers, the front radiator shrouding, and the oil containment belly pan all molded as a one-piece unit. This fairing is cut open on the left hand side for your generators and does have a side stand provision.

This piece only works with our 7GSXR7SS1 upper fairing.

7GSXR7SS1 - 00/03 GSXR750 SUPERSPORT UPPER

Suzuki GSXR 600 Super sport race upper fairing
What we have here is the upper fairing to our two-piece race fairing assembly. This piece is the upper headlight area with the headlight holes filled in and half of the right and left lowers and the radiator shroud all molded as a one-piece unit. This fairing splits with the upper and lower down about the base gasket of the cylinder of the bike down halfway threw the side. This allows you to remove the fairing assemblies on and off the bike very quickly and easily also allowing a smooth clean design because you don’t any parting seams up by the handlebars or around all of the radiator shrouding.

This piece only works with our 7GSXR7SS2 lower.

7GSXR79R - 00/03 GSXR UNDERSEAT RACE

Suzuki GSXR 600 Under seat enclosure race
Remove all that heavy black plastic under seat rear fender assembly and lighten up the back of your race bike. This race piece attaches inside of our super sport or super bike race tail and cleans off the inside bottom of your race bike. This is a must have to finish off the underside of your race bike.

7GSXR79 - 00/03 GSXR UNDERSEAT FOR STREET

Suzuki GSXR 1000 Undertail – under seat enclosure street
Hack out all that ugly plastic crap underneath your tail section and install one of our cool fiberglass under seat enclosures.
This piece uses your stock DOT approved tail light assembly so you don’t have to worry about someone rear ending you like happens with guys using undertails with dim LED lights. Those pieces are pretty unsafe, ours uses the stock DOT taillight.
Our piece also has a license plate bracket molded into it so you don’t have to fabricate or bend any pieces of metal like our competitors under seat enclosures. Simply hack out your black plastic pieces, do a little bit of cutting and trimming, and custom paint this under seat enclosure for an awesome custom street bike.

7GSXR77 - 00/03 GSXR DRAGBIKE SEAT PAN

Suzuki GSXR 1000 Dragbike Seat pan – stepped
This stepped dragbike seat pan fits any of our supersport tail sections above, or can be used with your stock tail section. Puts you down lower in the seat pocket for better launching.

6GSXR76 - 96/99 GSXR750 SWING ARM FENDER

Swing Arm Fender

7GSXR75 - 00/03 GSXR750/1000 FRONT FENDER

Suzuki GSXR 1000 Front fender
Direct replacement for the GSXR front fender. Just drill the mounting holes, take off your heavy plastic piece, and install our lightweight fiberglass fender. This fender is lighter than stock so your suspension reacts faster. This fiberglass fender is also available in carbon fiber. Ask one of our sales reps today.

7GSXR74SB - 00/03 GSXR750/1000 S/BIKE BRACKET

Suzuki GSXR 1000 Seat Bracket
Use this seat bracket to support the riders weight when using our 7GSXR74B Super bike race tail. You will need to drill some mounting holes near subsection to mount this bracket. We’ve seen people put rib nuts in the frame, use self-tapping screws, and some people will even popper this into the frame. This is a quick and easy installation.

7GSXR74S6 - 00/03 GSXR750 SUPERSPORT SEAT +6

Suzuki GSXR 1000 Dragbike tail +6
Stretched+6: same tail as our 7GSXR74S but stretched six inches longer than stock. Use your stock upholstery or our stepped drag bike seat pan 7GSXR77 below.

7GSXR74S4 - 00/03 GSXR750 SUPERSPORT SEAT +4

Suzuki GSXR 1000 Dragbike tail +4
Stretched+4, this tail section is like our 7GSXR74S but only four inches longer. Use your stock upholstery or our stepped drag bike seat pan 7GSXR77 below.

7GSXR74S - 00/03 GSXR750/1000 SUPERSPORT TAIL

Suzuki GSXR 1000 Supersport tail
Our most popular race tail for the GSXR 1000. This tail is right and left seat sides, the solo seat cowl, and tail light area all molded as a one-piece unit. The seat pan area, where the rider sits, is open to use with the stock Suzuki upholstery. This is an easy instillation, drill four mounting holes and mount onto your chassis. This is a race legal tail section for most racing organizations and is also a cool custom street bike tail section, the taillight is easily cut open for street use. Get yours today!

7GSXR74B - 00/03 GSXR750/1000 SUPERBIKE TAIL

Suzuki GSXR 1000 Superbike tail
What we have here is one of our one-piece race tails. We’ve taken the right and left seat sides, the solo seat cowl area, and the tail light area and molded it into a one-piece unit. We call this tail light super bike tail because the seat pan area where the rider sits is filled in and flat and uses close cell race padding instead of the stock upholstery. This is a race legal tail section for most racing organizations and is a cool tail section for custom street bikes. Get one today!

We offer a bracket assembly (7GSXR74SB, shown below) to support the riders weight so the fiberglass tail section doesn’t break.

7GSXR71S - 00/03 GSXR750/1000 STREET UPPER

Suzuki GSXR 1000 Street upper fairing Replace your crash damaged street fairing with one of our lightweight fiberglass pieces. Simply replace all of your bent, busted brackets, drill out mounting holes out of our fiberglass fairing, and mount on your bike and go riding again. Please note that we do not do the tab work on the inside of our fairing for the headlights simply because the headlight is mounted into the metal fairing bracket, the fairing bracket supports the weight of the heavy headlight assembly. Although the headlight was retained in the fairing originally from Suzuki it is not necessary to hold the headlight onto the bike. Simply mount your headlight into your bracket, put the fairing assembly up on your bike, mount the fairing at the mirrors on the top, and mount the fairing on both sides at the lowers on the bottom and go riding. This method holds up great at over a hundred miles per hour. If you have any questions about the headlight mounting assembly call one of our sales reps or our tech guy today.

7GSXR71C - 00/03 GSXR750/1000 COMPETION UPPER

Suzuki GSXR 1000 Competition upper fairing
This is a great little upper fairing for custom street applications or track day bikes. Track day guys love this fairing because they can take there expensive stock headlight assembly off of there bike, paint our upper fairing put it on there bike and go. Custom street bike guys love this because they can cut different headlight shapes in front of the fairing to butt up against there stock headlights. We’ve seen people cut round headlights, cat’s eyes, even a smiley face cut our of the front of the fairing and had the headlight shining threw in the back. This is a cool piece for your GSXR1000.

7GSXR711S - 00/03 GSXR600/750 SLAMMED TANK

7GSXR711S
Suzuki GSXR 1000 Slammed fuel tank
This is an awesome racing gas tank for your GSXR. Not only is this gas tank lighter than your stock fuel tank but this gas tank is slammed and smaller. What we mean by that is that this gas tank is two inches lower in the rear, that part that digs into your stomach, it is two inches lower in the back and the gas tank is actually two inches narrower so you can hold onto the bike at your crotch better and your elbows aren’t restricted when you’re hanging off the side of the motorcycle. Drag racers love this gas tank because it allows them to slide forward and stay over the top of the tank. Road racers love this tank because it allows them to move around the motorcycle more freely than the stock fuel tank does. You will love this gas tank.

The gas tank has aluminum mounting plate in the back to use with your stock mounting brackets and has an aluminum flange to fit your stock fuel pump. It comes with a nice aluminum racing gas cap. Tank has internal venting. Other options include carbon fiber or additional bungs for nitrous or turbo. Whether you are drag racing or road racing your GSXR you need this gas tank. Purchase yours today!