(Image 1) CGSXR75
CGSXR75 - 87 CAN GSXR750/1100 LEFT LOWER
Measurements, fitment, and other pictures...
Suzuki GSXR 750 Lower fairing – left
This is a left side lower fairing for your GSXR
Manufacturing Notes:
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
Customer Photos and Reviews
Once again we make every screen to order and most often needs custom installation on your part.
You might also be looking for...
(Image 1) 2GSXR77
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
2GSXR77 - 88/89 GSXR750 REAR FENDER N
Suzuki GSXR 1100 Rear fender
Replacement for the busted stock rear fender. This rear hugger mounts to the four vertical metal tabs on the swingarm.
Please note: Swingarm swaps are pretty common on these models so please look at the fender mounts on your swingarm.
If your swingarm has only one vertical tab and 3 inserts, use 90-92 rear fender 3GSXR77 which has 3 horizontal mounting tabs.
(Image 1) AT26M
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
AT26M - AIRTECH REAR FENDER - MODIFIED
Suzuki GSXR 750 Rear fender
This hugger is a brand new Airtech design for aftermarket overbraced 1st and 2nd gen GSXR750 swingarms like SPF where the brace runs parallel to the arm.
Fit it to modified street & race bikes to keep the rear shock, motor and carbs clean.
Inside width 9"
Outside width 11.75"
Fender length 13"
Depth 6.5"
(Image 1) CGSXR74
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
CGSXR74 - 87 CAN GSXR750/1100 RIGHT LOWER
Suzuki GSXR 750 Lower fairing – right
This is a right side lower fairing for your GSXR.
(Image 1) GSXR71
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
GSXR71 - 86/87 GSXR750/11 STREET UPPER
Suzuki GSXR 750 Street upper fairing
The turn signal holes have been filled in. This is a direct replacement fairing. Simply drill the mounting holes and mount onto your chassis.
Please note: this fairing mounts to the mid fairings with 2 bolts on each side.
(Image 1) GSXR711
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
GSXR711 - 86/87 GSXR750/11 REAR FENDER
Suzuki GSXR 750 Rear fender
This hugger is a brand new Airtech design for the GSXR750. Fit it to modified street & race bikes to keep the rear shock, motor and carbs clean. Works with both 17″ wheel (up to 190 tire*) or a standard 18″ wheel.
This rear fender fits the standard GSXR750 swingarm and is easily installed with a few rivet nuts.
* Some trimming may be required for chain/tire clearance depending on wheel/tire/chain combo – ask your sales rep for details.
(Image 1) GSXR712
(Image 2) GSXR712
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
GSXR712 - 86-87 GSXR750/11 NUMBERPLATE LARGE
Yoshimura GSXR 750 Number plate
This is a cool, larger Yosh number plate for racing, track days or a custom headlight install. It covers up the stock headlight opening and comes up on the lower edge of the windscreen.
Easily installed with windscreen screws or dzus fasteners..
11″x14″ so legal number plate size for most organizations (usual requirement 10″x12″).
(Image 1) GSXR71C
(Image 2) https://www.airtechmoto.com/files/images/gsxr712-3.jpg
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
GSXR71C - 86/87 GSXR750/1100 RACE UPPER
Suzuki GSXR 750 upper fairing - competition
This is the race version of our GSXR71 upper fairing. The headlight opening has been filled in and the sharp edges around the opening were blended in for a softer more aerodynamic shape. Combine with stock mids or the 3-vent racing mids below. This fairing was designed for the 750 but will fit the 1100 with some minor adjustments.
(Image 1) GSXR71P
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
GSXR71P - 86/87 GSXR750/11 RACE UPPER W/MIDS
Suzuki GSXR 750 One-piece upper
This is a one piece race upper fairing for the GSXR. It is the upper fairing and the right and left side panels molded as a one-piece unit. The headlight holes and turn signal holes have been filled in for race use. Simply drill the mounting holes and mount it onto your chassis for a cool one-piece race look.
Works with stock bellypan or our one-piece GSXR76 bellypan (see below).
(Image 1) GSXR72
(Image 2) GSXR72 - 86/87 GSXR750/11 RIGHT CENTER
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
GSXR72 - 86/87 GSXR750/11 RIGHT CENTER
Suzuki GSXR 750 Right Mid
This is a direct replacement panel for the right mid side of your GSXR.
(Image 1) GSXR73
(Image 2) GSXR73 - 86/87 GSXR750/11 LEFT CENTER
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
GSXR73 - 86/87 GSXR750/11 LEFT CENTER
Suzuki GSXR 750 Left Mid
This is a direct replacement panel for the GSXR left side mid panel.