SUZUKI GSX 1300 HAYABUSA '99-'07
Bummed because you slid your prized toy down the road? Hopefully all the damage you received was some road rash on your fairings. If ya did, we can help you out. As you can see in the pictures we offer quite a selection of bodywork for the Hayabusa. We offer stock and competition upper fairings, right and left lowers, radiator shrouds, front fenders, rear fenders, stock replacement tails, one piece race tails, several extended drag race tails, air boxes, fenders, and a whole lot more.
Heck Kent Riches has even designed 3 different fuel tanks for the busa' s. Absolutely no one makes the variety or quality of fairing parts for a Busa that we make. So whether you are looking to replace the crash-damaged fairings or to lighten up your bike for racing, give us a call we have what you need.
(Image 1) GSX13LSR4
(Image 2) GSX13LSR4
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
GSX13LSR4 - LAND SPEED FRONT FENDER
Hayabusa LSR front fender
NEW! This is a highly modified Hayabusa fender. There's a return lip along the bottom edge that comes back to the tire (requires trimming for clearance). Our most slippery Hayabusa fender to date!
(Image 1) GSX13LSRB1
(Image 2) GSX13LSRB1
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
GSX13LSRB1 - LAND SPEED RACING FAIRING "B"
Hayabusa Land Speed Fairing "B"- Upper
This fairing is a highly modified Hayabusa superbike fairing. The nose was brought forward and down, sides were extended, handcuff blisters added, windscreen area extended, radiator opening decreased with a single goal in mind: flat out speed.
Yet, it still uses stock airducts (although we recommend our high flow ducts) and stock first generation Hayabusa upper fairing bracket.
Please note: Fairing is supplied scribed for the extended windscreen that is available through Airtech, we leave cutting to you so you can position to your preference or cut for custom windscreen.
(Image 1) GSX13LSRB2
(Image 2) GSX13LSRB2
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
GSX13LSRB2 - LAND SPEED RACING BELLY PAN "B
Hayabusa Land Speed Fairing "B"- Lower fairing / belly pan
Special belly pan that is specifically designed to work with the Hayabusa GSX13LSRB1 upper and GSX13LSRB3 tail section. It stretches all the way to the back tire and buttons to both the front fairing and the seat.
(Image 1) GSX13LSRB3
(Image 2) GSX13LSRB3
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
GSX13LSRB3 - LAND SPEED RACING TAIL "B"
Hayabusa Land Speed Fairing "B"- Tail section
The next generation of the Charlie Toy tail specifically for the Hayabusa chassis. Mounts to stock seat bracket on gen1 subframe and requires only removal of a few tabs to mount. We have a support bracket available to support rear of tail section and stash your electronics.
Fully enclosed rear wheel, can be cut & trimmed as needed for different classes. Tail section ends 9" back from axle in farthest forward adjustment (stock swingarm).
(Image 1) GSX13LSRB5
(Image 2) GSX13LSRB5
(Image 3) GSX13LSRB5
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
GSX13LSRB5 - LSR "B" SEAT SUPPORT BRKT / TRAY
Hayabusa Land Speed "B"- Seat support bracket and elctronics tray
Simplifies mounting of the GSX13LSRB3 tail section onto a lightly modified gen 1 Hayabusa subframe - removal of a few tabs and grab handle required.
Click here for tray installation guide and subframe modifications
If you wish to use this tray with a custom subframe or a Gen2 subframe, we can supply it untrimmed as shown to the left. Please ask at the time of the order!
With the tray installed it’s pretty simple to create a glove box in the tail. We scribed the tail where you would need to cut it, use the piece you cut out to make a little hatch door with a hinge and a dzus button or two.
Easy access to whatever you stash in there, power commander, air fuel mixture, heck even a bottle of water for after a pass.
If you wish to use this tray with a custom subframe or a Gen2 subframe, we can supply it untrimmed as shown to the left. Please ask at the time of the order!
(Image 1) GSX13LSRBT
(Image 2) GSX13LSRBT
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
GSX13LSRBT - LAND SPEED RACING UPPER "B" TURBO
Hayabusa Land Speed Fairing "B"- Turbo Upper
This is the turbo version of the LSR "B" fairing. The nose was brought forward and down, sides were extended, handcuff blisters added, windscreen area extended, radiator opening decreased with a single goal in mind: flat out speed.
Yet, it still uses the stock first gen Hayabusa upper fairing bracket.
Please note: Fairing is supplied scribed for the extended windscreen that is available through Airtech, we leave cutting to you so you can position the screen to your preference or cut for custom windscreen.
(Image 1) GSX13RB1
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
GSX13RB1 - 99/05 GSX1300 RAD BUSA UPPER
Rad Greaves Busa upper
This upper has 4 duct openings, 2 for the regular airbox and 2 additional ones to help force air towards the radiator.
(Image 1) GSX13RB2
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
GSX13RB2 - 99/05 GSX1300 RAD BUSA LOWER
Rad Greaves Busa lower / belly pan
Looooong lower extends all the way to the rear tire!
(Image 1) GSX13SB1
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
GSX13SB1 - 99/04 GSX1300 S/BIKE RACE UPPER
Suzuki GSX 1300 Hayabusa Super bike upper fairing "A"
Great land speed fairing for non-turbo bikes.
(Image 1) GSX13SB1T
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
GSX13SB1T - 99/04 GSX1300 S/BIKE TURBO UPPER
Suzuki GSX 1300 Hayabusa Super bike upper fairing - Turbo "A"
Land speed upper for turbo bikes - no ram air ducts.
(Image 1) GSX13SB2
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
GSX13SB2 - 99/04 GSX1300 S/BIKE LOWER
Suzuki GSX 1300 Hayabusa Super bike lower fairing
This is the lower belly pan for our two-piece super bike fairing assembly for the Busa. This is the bottom half of the right and left lowers and the front radiator shroud area all molded as a one-piece unit. The bottom is filled in for oil containment and the rear of this lower has been stretched four inches back towards the rear tire. This is a really cool belly pan that works with our super bike upper or our super bike upper Turbo fairings.